CAPSTAN WINCH ON TRAILER – ELECTRIC : TL 3022 DRE 1050

The trailer-mounted capstan winch is designed for laying underground telecommunication and power cables in pre-installed ducts or open trenches, as well as for subducting operations. Their new 3 tonne electric capstan E-Winch is powered by two high powered batteries allowing you to work for more than four hours without interruption. It can be recharged from  mains power, generator or car charging points, allowing you to continue laying cables without interruption. Its compact design and light weight allows all models to be used in tight spaces and its dual capstan system provides pull at constant speed and force. The electric drive of their new 3 tonne electric capstan E-Winch allows it to be used in closed and confined environments. Thanks to its electric motorisation via batteries, it avoids the complicated installation of exhaust ducts to divert the greenhouse effect gases. Finally, you will benefit from an unrivalled increased silence allowing you to work at night.

The cable on all the Plumett models is automatically paid in and stored by means of a swivelling pulley at a fixed point. This design allows low tension winding, regardless of the pulling force, and guarantees a stable and constant load on the cable to increase its lifespan. During the pulling operation, its adjustable limiter automatically stops the winch if overloaded. Its reverse gear allows the cable to be safely and easily unwound. Their trailers are equipped with a suspension axle and, depending on the model, with a removable polyester hood or with an overhanging protective canvas.

With the optional addtion of the “electronic assistant MP 50“, you are able to monitor and record the most important values during installation and to supervise the pulling force.

Available in 9 versions, discover their range of cable pulling winches at https://www.plumettaz.com/en/product/capstan-trailer/TL%203022%20DRE-1050%2F9