Description
The Lace Up Cable Grip (LCG) supports cable mid-way or after the cable is terminated. The flat grip is wrapped around the cable and simply laced up like a boot. Designed to anchor cables in a vertical or sloping position, the LCG is frequently used to suspend cable on the mine shaft wall. The LCG is also used to anchor cables in manholes where the longitudinal movement caused by road vibration needs to be kept in check.
Regular inspection for signs of stress, misuse or wear & tear which affects the safe working load of the wire cable grip is to be carried out. Best practice is to renew sooner rather than later.
Also available in stainless steel* wire for use in corrosive environments.
• Simply add –SS* or -TH after the part code to indicate your selection.
Product Code | Suit cable OD | Grip Length | UTS | WLL |
---|---|---|---|---|
Galvanised Wire* | (Load kN) | (Load kN) | ||
LCG-1419D | 14-19mm | 500mm | 9 | 3 |
LCG-1928D | 19-28mm | 600mm | 15 | 5 |
LCG-2840D | 28-40mm | 800mm | 24 | 8 |
LCG-4055D | 40-55mm | 900mm | 35 | 11 |
LCG-5575D | 55-75mm | 1000mm | 62 | 20 |
LCG-7595D | 75-95mm | 1200mm | 98 | 32 |
LCG-95120D | 95-120mm | 1400mm | 133 | 44 |
*woven with 2070 grade galvanised, standard “soft eye” design has aluminium (Al) ferrule. Also available with thimbles & Cu ferrules or total SS wire, thimbles & ferrules. Please enquire if your permutation is not listed.
Stainless Steel Wire* | (Load kN) | (Load kN) | |||
---|---|---|---|---|---|
LCG-1419D-SS | 14-19mm | 500mm | 9 | 3 | |
LCG-1928D-SS | 19-28mm | 600mm | 15 | 5 | |
LCG-2840D-SS | 28-40mm | 800mm | 24 | 8 | |
LCG-4055D-SS | 40-55mm | 900mm | 35 | 11 | |
LCG-5575D-SS | 55-75mm | 1000mm | 62 | 20 | |
LCG-7595D-SS | 75-95mm | 1200mm | 98 | 32 | |
LCG-95120D-SS | 95-120mm | 1400mm | 133 | 44 | |
*woven with 316 SS wire, standard “soft eye” design has copper (Cu) ferrules. Also available with thimbles (-TH) & Cu ferrules or total SS wire, thimbles (-TH) & ferrules. Please enquire if your permutation is not listed.